Re: [SPAM] Re: MuCap

[Steven Clayton <smclayto@npl.uiuc.edu>]

Dear Peter,

actually I leave from Illinois on Monday afternoon, only arriving
at PSI on Tuesday, probably in the early afternoon.  Maybe we should
decide on a course of action before my departure.

Steven

On Fri, Oct 14, 2005 at 09:48:25AM -0500, Peter Kammel wrote:
> Dear Peter,
> 
> Additional blocks above the rollers are much more realistic. I will try to
> get the longer bolts so that Steve can bring them to PSI. I just made
> an elog with further construction drawings. The blocks need to have the
> right shape, probably have to be milled from aluminium. If Adrian wants to
> do that, we could put them in after Steve and Brendan have arrived.
> 
> Thanks for your initiative. 
> 
> Peter
> 
> On Fri, 14 Oct 2005, Peter Winter wrote:
> 
> > Peter,
> > 
> > I see your point that you don't want too much additional work and that 
> > any further changes are in principle a source of distraction. This 
> > morning, Mr. Gnädiger asked me about the reply to his proposition and I 
> > explained him our concerns. Nevertheless, I showed him the pictures 
> > especially the third one you send to me (see attached lager.jpg) that 
> > was very good to understand the mounting. In the second attached picture 
> > is the scheme of the proposed modification. The red new blocks are 
> > standard plates with 60mm height available at the storage. There is only 
> > need for longer screws then. He assured me that they can do it until 
> > Wednesday evening before the survey group comes if they know it on Monday.
> > If we follow your suggestion and postpone the modification for the time 
> > after the run, we have to lift the rails again. For that we have to be 
> > aware that the existing 60mm support for the rails need to be changed 
> > due to the metal shielding. This (plus the additional time for survey of 
> > the rails) will add up on the total amount of time for the exchange.
> > For now I told Mr. Gnädiger that we are rather not planning the change 
> > and that in any case we would wait until Steve arrives on Monday (is 
> > that date correct?).
> > 
> > Best greetings
> > Peter
> > 
> > PS: I had a look at the document for Mike and I couldn't think of more 
> > than what Fred wrote.
> > PPS: Are we going to get a new pressure gage for the chamber gas bottle? 
> > Or we wait until we can take the one from MuLan?
> > 
> 
> Peter Kammel  /  pkammel@uiuc.edu
> Department of Physics, Loomis Laboratory
> University of Illinois at Urbana-Champaign
> 1110 West Green Street, Urbana, IL 61801 
> Tel (217) 333-5424 / Fax (217) 333-1215   
> 
>