Dear Lee, I attached my sketches. The dimensions are ok. Same length i.e. 100 mm is fine. For Dave, before I forget. The long 6 cm target will be replaced with the usual 4 cm target before the MuLan run. Best regards from PSI Peter On Thu, 1 Jun 2006, Lee Roberts wrote: > Hi Dave and Peter, > > The dimensions Dave gave me are 3 mm thick by 18 mm by 100 mm. > Are these correct for Peter's tiles? Do we want the outer one to be this > long, or do you want smaller length, say 3 mm thick by 18 mm by 50 mm, or > even shorter? > > We are building a fiber light guide from 1mm clear fibers that we have > here. The scintillator has not yet arrived. > > Cheers, > > Lee > > -- > ___________________________________________________________________________ > Lee Roberts Phone: 617-353-2187 | At Brookhaven National Lab: > Fax: 617-353-9393 | Building 510A > Professor of Physics | BNL > Department of Physics | Upton, NY 11973 > Boston University | Office: 631-344-2287 > 590 Commonwealth Ave. | g-2 Control 631-344-7584 > Boston, MA 02215 | Room (or) 631-344-7669 > email: roberts@bu.edu | Fax: 631-344-5568 > http://physics.bu.edu/roberts.html | > _________________________________________|________________________________ > Peter Kammel / pkammel@uiuc.edu Department of Physics, Loomis Laboratory University of Illinois at Urbana-Champaign 1110 West Green Street, Urbana, IL 61801 Tel (217) 333-5424 / Fax (217) 333-1215
Attachment:
catcher.doc
Description: MS-Word document