[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Berkeley FADC board



Fred,

this JTAG connector should it go to the same spot where the ribbon color 
input cable at the data taking setup was connected? On the board there 
are in principle 3 possibilities for this connector, two next to each 
other and one in the center. And should the number 1 pin on your 'highly 
amateur JTAG cable' go to the same position like the number 1 pin on 
this colored cable? Just asking because there is no locking system so 
that one can connect the cable with 0 and 180 degrees on each connector.
Peter

PS: In case that my description isn't clear I can also phone you.