RE: MuCap

[Peter Kammel <kammel@npl.uiuc.edu>]

Sorry too,

I should have thought about the escv2.dwg. Will be there in a minute.

Regards

Peter


On Tue, 7 May 2002, Larry Bartoszek wrote:

> Dear Peter and John,
> 
>      I got the latest file of MuCap6.dwg, but all your new work is in the
> file escv2.dwg, which was not in the archive.  Can you please put this file
> zipped in the same place I got the other one (ftp.npl.uiuc.edu/pub/mucap )?
> 
>                   Thanks,
>                   Larry
> 
> P.S. Sorry about the password thing.  I hate it when I have the info and
> don't remember it.
> 
> Bartoszek Engineering-- www.bartoszekeng.com
> 
> -----Original Message-----
> From: Peter Kammel [mailto:kammel@npl.uiuc.edu]
> Sent: Monday, May 06, 2002 10:31 AM
> To: Larry Bartoszek
> Cc: John Blackburn
> Subject: RE: MuCap
> 
> 
> Dear Larry,
> 
> I have posted John's latest drawing MuCap6 on the mucap website (link
> detector systems) and ftp side. It contains the design of the gondola
> holders and a sketch of the end wheel to support them.
> 
> I hope to get the base plate dimensions from PSI today. Not a fancy
> drawing but the basic geometry.
> 
> I hope that will be sufficient for you to make your first stab at the
> problem. I have time for discussion up to Thusday morning, then I
> will be pretty tied up in a meeting until the weekend.
> 
> Some details. John's drawing has become huge, more than my computer can
> digest. We hope that mechanical desktop will compactify things.
> You will notice that the top/bottom cylinder separation is not horizontal.
> perhaps it is better to make that horizontal and rotate the detectors
> accordingly.
> 
> Best regards
> 
> Peter
> 
> 
> On Fri, 3 May 2002, Larry Bartoszek wrote:
> 
> > Dear Peter,
> >
> >      I'm sorry I haven't been able to get back to you.  This has been a
> most
> > hectic week.  I look forward to seeing the drawings of the existing
> > platform.  One of the reasons I have not made any progress yet is that
> > without knowing the distance to the "floor" or the configuration of the
> > interface structure, there is not much I can design.  Talk to you Monday.
> >
> >                       Thanks,
> >                       Larry
> >
> > Bartoszek Engineering-- www.bartoszekeng.com
> >
> > -----Original Message-----
> > From: Peter Kammel [mailto:kammel@npl.uiuc.edu]
> > Sent: Friday, May 03, 2002 7:59 AM
> > To: Larry Bartoszek
> > Subject: MuCap
> >
> >
> > Hi Larry,
> >
> > I called you a few times, with not much success.
> > If you have time please call me. BTW my home tel
> > is (217) 351 0680.
> > The news from PSI are the following: They are totally
> > overloaded with other aspects of the experiment and
> > won't be able to build the platform and change their
> > TPC gantry this year.
> > However, we do have a platform at PSI from our previous
> > experiment. It is a iron plate (1m x 2m) resting on
> > 3 leveling feet. PSI could weld on 4 leveling feet.
> > Our idea is to leave the TPC rails mounted on the floor
> > for the time being and mount the e-det rails onto the
> > smaller platform. Eventually everything could be combined
> > on a common platform next year. Seems like a reasonable
> > solution to me.
> >
> > On Monday I will get the exact height, thickness and dimensions
> > of the platform.
> >
> > John has finished MuCap6.dwg yesterday, we will check it today
> > and then sent it to you.
> >
> > So if you don't have objections, we could go from there on Monday.
> >
> > With best regards
> >
> > Peter
> >
> >
> > Peter Kammel  /  pkammel@uiuc.edu
> > Department of Physics, Loomis Laboratory
> > University of Illinois at Urbana-Champaign
> > 1110 West Green Street, Urbana, IL 61801
> > Tel (217) 333-5424 / Fax (217) 333-1215
> >
> >
> 

Peter Kammel  /  pkammel@uiuc.edu
Department of Physics, Loomis Laboratory
University of Illinois at Urbana-Champaign
1110 West Green Street, Urbana, IL 61801 
Tel (217) 333-5424 / Fax (217) 333-1215