RE: MuCap

[Larry Bartoszek <bartoszek@fnal.gov>]

Dear Peter and John,

     I got the latest file of MuCap6.dwg, but all your new work is in the
file escv2.dwg, which was not in the archive.  Can you please put this file
zipped in the same place I got the other one (ftp.npl.uiuc.edu/pub/mucap )?

                  Thanks,
                  Larry

P.S. Sorry about the password thing.  I hate it when I have the info and
don't remember it.

Bartoszek Engineering-- www.bartoszekeng.com

-----Original Message-----
From: Peter Kammel [mailto:kammel@npl.uiuc.edu]
Sent: Monday, May 06, 2002 10:31 AM
To: Larry Bartoszek
Cc: John Blackburn
Subject: RE: MuCap


Dear Larry,

I have posted John's latest drawing MuCap6 on the mucap website (link
detector systems) and ftp side. It contains the design of the gondola
holders and a sketch of the end wheel to support them.

I hope to get the base plate dimensions from PSI today. Not a fancy
drawing but the basic geometry.

I hope that will be sufficient for you to make your first stab at the
problem. I have time for discussion up to Thusday morning, then I
will be pretty tied up in a meeting until the weekend.

Some details. John's drawing has become huge, more than my computer can
digest. We hope that mechanical desktop will compactify things.
You will notice that the top/bottom cylinder separation is not horizontal.
perhaps it is better to make that horizontal and rotate the detectors
accordingly.

Best regards

Peter


On Fri, 3 May 2002, Larry Bartoszek wrote:

> Dear Peter,
>
>      I'm sorry I haven't been able to get back to you.  This has been a
most
> hectic week.  I look forward to seeing the drawings of the existing
> platform.  One of the reasons I have not made any progress yet is that
> without knowing the distance to the "floor" or the configuration of the
> interface structure, there is not much I can design.  Talk to you Monday.
>
>                       Thanks,
>                       Larry
>
> Bartoszek Engineering-- www.bartoszekeng.com
>
> -----Original Message-----
> From: Peter Kammel [mailto:kammel@npl.uiuc.edu]
> Sent: Friday, May 03, 2002 7:59 AM
> To: Larry Bartoszek
> Subject: MuCap
>
>
> Hi Larry,
>
> I called you a few times, with not much success.
> If you have time please call me. BTW my home tel
> is (217) 351 0680.
> The news from PSI are the following: They are totally
> overloaded with other aspects of the experiment and
> won't be able to build the platform and change their
> TPC gantry this year.
> However, we do have a platform at PSI from our previous
> experiment. It is a iron plate (1m x 2m) resting on
> 3 leveling feet. PSI could weld on 4 leveling feet.
> Our idea is to leave the TPC rails mounted on the floor
> for the time being and mount the e-det rails onto the
> smaller platform. Eventually everything could be combined
> on a common platform next year. Seems like a reasonable
> solution to me.
>
> On Monday I will get the exact height, thickness and dimensions
> of the platform.
>
> John has finished MuCap6.dwg yesterday, we will check it today
> and then sent it to you.
>
> So if you don't have objections, we could go from there on Monday.
>
> With best regards
>
> Peter
>
>
> Peter Kammel  /  pkammel@uiuc.edu
> Department of Physics, Loomis Laboratory
> University of Illinois at Urbana-Champaign
> 1110 West Green Street, Urbana, IL 61801
> Tel (217) 333-5424 / Fax (217) 333-1215
>
>