Dear Peter, As attached you will find run8 averaged by minute data. We didn't measure Hall temperature at that time, this additional PT-100 sensor was installed together with HS temperature sensor and with electronics upgrade. There is no MFC5 as well... If you need something else, I'm ready to help. Peter. On 9/28/06, Peter Kammel <kammel@npl.uiuc.edu> wrote: > Dear Peter, > > We have included your CHUPS files in the main mySQL database > and using it already extensively. Could you be so kind to > send me similar information conc run8. Alas, the HS data > will be missing, but we could check flow and T etc. > > Many thanks > > Peter > > On Tue, 5 Sep 2006, Peter Kravtsov wrote: > > > Dear Peter, > > > > As attached you will find two separate text files for run9 and run10. > > I exported these channels from database: > > Time, > > PT-1 [bar] - TPC pressure > > H2O_sensor [ppm] > > MFC4_flow [l/min] - TPC inlet hydrofen flow > > MFC5_flow [l/min] - TPC outlet hydrofen flow > > H2Flow_AVG [l/min] - MFC4 averaged by 1 minute > > TT5 [K] - temperature of humidity sensor > > TT6 [K] - Hall temperature > > > > All parameters are averaged by 1 minute. > > If you need all data without averaging, let me know. > > (run9 non-averaged data take about 170Mb in text format). > > > > Best regards, > > Peter II. > > > > > > On 8/31/06, Peter Kammel <kammel@npl.uiuc.edu> wrote: > >> > >> Dear Peter, > >> > >> I have attached a jpg showing the parameters we are interested in. > >> In the end, we are interested in the complete run time period. > >> So it will be a large file. Text with comma delimited entries > >> would be fine. It should be a separate DB for Run9 and Run10. > >> > >> Many thanks > >> > >> Peter > >> > >> > >> On Thu, 31 Aug 2006, Peter Kravtsov wrote: > >> > >> > Dear Peter, > >> > > >> > Thanks, I had nice summer - we spent 4 months to renovate > >> > our new flat and move there. > >> > > >> > With regard to CHUPS database, of course I will help > >> > you to get all necessary data. But there are lot of data. > >> > If you let me know wich channels you need and time period, > >> > I can export the data to text or Excel format. > >> > > >> > Best regards, > >> > Peter II > >> > > >> > On 8/31/06, Peter Kammel <kammel@npl.uiuc.edu> wrote: > >> >> > >> >> Dear Peter II, > >> >> > >> >> I hope you had a nice summer. We are intensifying our analysis > >> >> work on the recent runs (run9, run10). As a first step we want > >> >> to combine all slow control data with the main run based database. > >> >> > >> >> A key component would be the CHUPS database. We are using MySQL > >> >> for this DB project. Could you make us the CHUPS DB avaiable > >> >> in an easily importable format. > >> >> > >> >> Many thanks > >> >> > >> >> Peter > >> >> > >> >> Peter Kammel / pkammel@uiuc.edu > >> >> Department of Physics, Loomis Laboratory > >> >> University of Illinois at Urbana-Champaign > >> >> 1110 West Green Street, Urbana, IL 61801 > >> >> Tel (217) 333-5424 / Fax (217) 333-1215 > >> >> > >> >> > >> > > >> > > >> > -- > >> > Best regards, > >> > Peter. > >> > > >> > >> Peter Kammel / pkammel@uiuc.edu > >> Department of Physics, Loomis Laboratory > >> University of Illinois at Urbana-Champaign > >> 1110 West Green Street, Urbana, IL 61801 > >> Tel (217) 333-5424 / Fax (217) 333-1215 > >> > >> > >> > > > > > > -- > > Best regards, > > Peter. > > > -- Best regards, Peter.
Attachment:
run8_4_Peter_group_by_minute_Fast.zip
Description: Zip archive