[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: back?
Sorry, I only just got back in town and to a computer.
I've added a new display trigger object for all muSC hits
(from the MBAS module, bank MUSC). It seems to run fine,
though my remote connection is too slow to look at many
events. The ODB was screwed up at first, so I had to
load the old file ana.odb and change a few settings;
the present ODB is saved in evdisp.odb. Recall how to
use the display:
1) set some environment variables: "[data@dolphin work]$ source setup_env"
2) don't forget the -g flag: "[data@dolpin work]$ ./mu -g -i /mnt/midas-mucap/run24149.mid"
3) quit nicely by hitting "!" in the terminal window, and then the Quit
button of the TPC event display window.
Also recall that hits in the muon entrance counters are
indicated at the bottom of the TPC display window: Black
dots for muSC (parameter 6001), red for muPC1 x (parameters
4001 to 4024), blue for muPC1 y (parameters 4051 to 4074).
muSCA is not indicated, but I may add that shortly...
okay I've added muSCA (parameter 6002) as a green dot above
the other counters.
I hope this update isn't too late to be useful. Let me know
of any other triggers or features you would like.
Best regards,
Steven
On Fri, Dec 02, 2005 at 05:36:22PM -0600, Peter Kammel wrote:
> Dear Steve,
>
> Are you back again? One quick question, could you recompile
> your event display on
> /home/data/mu/work
> [data@dolphin work]$
> ,which Fred installed, so that it displayed tracks for each
> mSC hit (not mSC*mPC PP or some combination like that).
> That would help a lot in debugging the current large
> difference between mSC and mSC*mPC rate.
>
> Thanks
>
> Peter