Re: Demon

[René Prieels <R.Prieels@fynu.ucl.ac.be>]

Dear Fred,

We already received the PCB cards. The oven is repaired and function 
perfectly.

But we still wait for the MAXIM's ADCs. They promised the chips for the 
3rd of May... after already a long delay. It's a really bad company, 
but we have no power on them for the small amount of money of the 
order. THis is not the first case it occurs.

All the other modules are here. As soon as the ADCs are there it will 
take only 2 or 3 days to mount then cards.

If you have a small already compiled program to load into the Xilinx 
chips, I will be glad to received it to check that the loading is O.K.
I keep you informed as soon as the ADC chips arrive.

René

Le 18-mai-05, à 07:41, Frederick Gray a écrit :

>> Note 2:  on the FADC prototype board
>> 1) The  files for the prototype board PCB realization where returned 
>> by
>> the fabrication company for incompatibility with class 6 (some 0.001 
>> mm
>> mismatch) due to rounding between inch and mm units. This was 
>> corrected
>> and resent. (Board is now promised for the 8th May)
>> 2) We are still waiting a repair (an control card replacement) of our
>> oven for component soldering on the PCB
>> 3) We are also waiting the ADC 's from Maxim company.
>
> Hi, Rene,
>
> Is there any news on the production of the flash ADC prototype board?
>
> Thanks,
>
> -- Fred
>
> -- Fred Gray / Visiting Postdoctoral Researcher                 --
> -- Department of Physics / University of California, Berkeley   --
> -- fegray@berkeley.edu / phone 510-642-2438 / fax 510-642-9811  --
>
>
---------------------------------------------------------------------
  René PRIEELS                                   Universite Catholique 
de Louvain
  email: R.Prieels@fynu.ucl.ac.be     Departement de Physique / FYNU
  Tel  : ++ 32 (0)10 / 47 32 09             Chemin du cyclotron, 2
  Fax  : ++ 32 (0)10 / 45 21 83            B-1348 Louvain-la-Neuve - 
BELGIUM
---------------------------------------------------------------------