DAQ

• report on updated DAQ (Tom & Fred, May 03)
• DAQ manual (Tom & Fred, May 03)
  

• Preliminary specs
• Manual
• Simple instructions controller setup

(more details given in Rene's manual)
• start program on PC (directory comet)
• click set modes (opens mode window)
• click set parameters (opens parameter window)
• toggle clock mode and watch compressor LED to confirm communication
• after power off disconnect/connect cycle
• parameter window

load suitable input file
change parameters (thresholds close to value*10 mV)
send to compressor
• mode window
• define inputs and their modes

select FPGA, cable and mode
add
select in text window
set selected items to activate
continue with next FPGA group or take it from list
• define masks

setmasks to disable all channels
select FPGA, cable, wires, mask
select in text window
set selected items to activate
• Exponential pulse generator board
• description ( pulser.doc , puls1.eps , puls2.eps )
• pcb files ( G-A BOARD V 2.zip )

• anode transition board
• CMS receiver card
• LE32_Doc.zip
• LE32_Proj.zip
• Le32_mfk.zip
• Bondar chip
• Genna's cathode card ( pcp16f.zip )

• datasheet
  
• Peter Dick's disk
• lattice
• updated programs 2003, readme
• Lattice program

• slow control draft

• V767 manual
• CERN tdc32 chip
• http://micdigital.web.cern.ch/micdigital/tdc32.htm
• data sheet
• manual
  

• VxWorks program 7/25/01

This version does not do data compression or chained DMA
but does write out the full MuCap data structure on the receiving
PC and manages to read out the TDC400's with a series of
block DMA transfers.
• Proposed data structure (T. Case)