Hallo Peter Ich habe leider eine schlechte Nachricht betreffend der APD-Boards. Bei den Tests der Boards durch Alexey hat sich herausgestellt, dass gewisse Boards schwingen. Bei der Überprüfung des Layouts hat sich ergeben, dass die inneren Lagen des kopierten Teils nicht mit GND verbunden sind (siehe pdf-Attachment). Leider sind zwei der drei zusätzlich bestückten Boards davon betroffen. Mit dem dritten Board hat Alexey Tests gemacht um die Ursache des Schwingens zu ergründen. Derzeit ist folglich lediglich das Prototypenboard funktionsfähig. Ich habe dieses heute an Herrn Petitjean zum Versand übergeben. Falls erwünscht, werden wir nächste Woche die zwei verbleibenden guten Boards bestücken. Gruss Urs -----Original Message----- From: Peter Kammel [mailto:kammel@npl.uiuc.edu] Sent: Mittwoch, 13. September 2006 16:20 To: Petitjean Claude Cc: Greuter Urs Subject: Re: apd board (fwd) Lieber Claude, Duerfte ich Dich um Unterstuetzung bitten. Urs Greuter von der Elektronik Gruppe has ein Prototyp Board fuer ein APD readout fertiggestellt. Koenntest Du mir dies bitte nach Illinois Express senden. Es ist klein, sollte aber gut verpackt werden, um die APDs zu schuetzen. Ich bin sicher das Urs das Board sicher verpackt, koenntest Du es bitte bei ihm abholen und abschicken. Besten Dank und herzliche Gruesse Peter Peter Kammel / pkammel@uiuc.edu Department of Physics, Loomis Laboratory University of Illinois at Urbana-Champaign 1110 West Green Street, Urbana, IL 61801 Tel (217) 333-5424 / Fax (217) 333-1215 ---------- Forwarded message ---------- Date: Wed, 13 Sep 2006 16:06:58 +0200 From: Alexey Stoykov <alexey.stoykov@psi.ch> To: Peter Kammel <kammel@npl.uiuc.edu> Subject: Re: apd board Dear Peter. The performance of the board is as expected. I have the APD-arrays for two more boards. After you sent the scint/frames to PSI I will assemble the detectors and test them. Let me know the results of your tests with the existing board. The operating voltage for the array is +(121-123)V. Regards, Alexey Peter Kammel wrote: > Dear Alexei, > > Yesterday, Urs sent me pictures of the assembled > apd board and told me, that you tested it. > > How was the performance? Where there any > problems? > > Once I know that is was ok, they will build > two more boards. Do you still have APDs for those? > I will ask him to send the existing board to > UIUC, so that we can mount the scintillator > and test its resolution. Once we have that, > I'll send two scint/frames to PSI. Then you can > assemble two more complete detectors and test them yourself. > > Thanks and best regards > > Peter >
Attachment:
ERROR_on_GND_plane.pdf
Description: ERROR_on_GND_plane.pdf