Re: Kicker grading measurement

[Peter Winter <peter.winter@psi.ch>]

Mike Barnes wrote:

>The ground wire should be as short as reasonable possible and it should be
>positioned so as to minimize its inductance and also pickup from the HV
>pasts of the circuit.
>
We used the same grounding cable like last year so the length is the same.

>What is the HV voltage and frequency for your measurement?
>  
>
We were at 3.4 kV with a 1mus TTL signal at 1kHz.

> Was this piece used during the latest measurements?.
>  
>
Last time and this time we only had a 3cm long alligator clip at the end 
of the HV probe.

>Where did you ground the HV probe for your measurements?
>  
>
The ground is attached to the metal plate inside the kicker just at the 
whole where the fischer plug goes through. It's the same spot like last 
year.

Peter