Re: current readback

[Steven Clayton <smclayto@npl.uiuc.edu>]

Another thing to try to check the MSCB communication:
1) stop mscb_scs900_frontend (and all the other frontends)
2) run /home/data/daq/midas/mscb/msc
     addr 1
     info
The settings of the MSCB SCS900 should be displayed.
Change something with: "write [ch] [value]"
Read with "read [ch]"

Steven

On Mon, Dec 12, 2005 at 03:06:28PM -0600, Steven Clayton wrote:
> Dear Peter W.,
> 
> it looks like you are having trouble with the Fluke readback.  This
> could be because the ttyUSB* assignments changed when you rebooted
> snake.  The port is set in the file fluke.c to ttyUSB11.  Try
> changing it to ttyUSB10 or ttyUSB12 and run "make."  It should only
> be necessary to restart the TPC frontend.
> 
> Steven