Returned mail: see transcript for details (fwd)

[Peter Kammel <kammel@npl.uiuc.edu>]

---------- Forwarded message ----------
Date: Mon, 28 Apr 2003 14:20:13 -0500
From: Mail Delivery Subsystem <MAILER-DAEMON>
To: kammel@npl.uiuc.edu
Subject: Returned mail: see transcript for details

The original message was received at Mon, 28 Apr 2003 14:20:13 -0500
from one.npl.uiuc.edu [128.174.13.13]

   ----- The following addresses had permanent fatal errors -----
<greg@opt.imum.fiberoptics.com>
    (reason: 550 Host unknown)

   ----- Transcript of session follows -----
550 5.1.2 <greg@opt.imum.fiberoptics.com>... Host unknown (Name server: opt.imum.fiberoptics.com: host not found)
Reporting-MTA: dns; nialas.npl.uiuc.edu
Received-From-MTA: DNS; one.npl.uiuc.edu
Arrival-Date: Mon, 28 Apr 2003 14:20:13 -0500

Final-Recipient: RFC822; greg@opt.imum.fiberoptics.com
Action: failed
Status: 5.1.2
Remote-MTA: DNS; opt.imum.fiberoptics.com
Diagnostic-Code: SMTP; 550 Host unknown
Last-Attempt-Date: Mon, 28 Apr 2003 14:20:13 -0500

--- Begin Message ---

• To: greg@opt.imum.fiberoptics.com
• Subject: 1mm connectors and fibers
• From: Peter Kammel <kammel@npl.uiuc.edu>
• Date: Mon, 28 Apr 2003 14:20:09 -0500 (CDT)

Dear Greg,

For an LED system which we are developing, I am interested 
to connect one 1mm fiber to another using a detachable 
connection.

So we are interested in

- 500m spool of jacketed 1mm fiber
- 2x100 Toslink connectors to be mounted on the fibers.
  Can one couple two fibers with the Toslink connector
  or does one need some barrel in beteen?
- Perhaps 100 Toslink connector to be mounted on
  a instrument panel.

Please quote with price and lead time.

Thanks

Peter 

Prof. Peter Kammel  /  pkammel@uiuc.edu
Department of Physics, Loomis Laboratory
University of Illinois at Urbana-Champaign
1110 West Green Street, Urbana, IL 61801 
Tel (217) 333-5424 / Fax (217) 333-1215   

--- End Message ---